BAC2410D 10A 24V Generator Battery Charger Module Auto Intelligent Float Charging Circuit Board Monitoring Display

Battery Chargers1 OVERVIEW:Fit with up-to-date power supply device, float charger BAC2410D is specially designed for meet the charging characteristics of the lead-acid engine starter batteries and can be used for long-term float charging of 24V lead-acid batteries.2 PERFORMANCE AND CHARACTERISTICS:a) Switch power supply structure, wide input alternating voltage range, small size, light weight, highefficiency rate;b) Automatic two-stage charging process (first constant current, then constant voltage) carried outaccording to storage battery charging characteristics to prevent overcharging and significantlyprolong battery lifetime;c) Built-in PFC circuit can calibrate the power factor above 0.99;d) Built-in current protective circuit, which can give effective protection when output over current,short-circuit or reverse connection occurs. Regard power lamp or charge lamp fast blinking as alarm;e) Suitable for 24V storage battery and the rated current is 10A;f) LED display: Power indication (Green light) and charging indication (Red light).g) Monitoring display: Digital tube circularly display the current charging voltage and charging current.Charging is performed according to the battery charging characteristics using two-stage method.1) The first stage is named as 'constant current': when the battery terminal voltage falls below thepre-set value;2) The second stage is named as 'constant voltage': when the battery terminal voltage exceeds thepre-set value, charging current will decrease with the rising of terminal voltage until the pre-set current value is reached; then Chargers automatically to float mode. As soon as charging current value falls below 0.5A and the constant voltage value is reached, the battery is basically charged (charging indicator will extinguish). After that charging current will only neutralize the battery self discharge. Even long-term charging cannot harm the battery, as charger can keep the battery fully charged and so guarantee long lifetime of the battery.LED digital tube displays voltage and current in real-time, when the voltage indicator is illuminated tocircularly display the current voltage and the current indicator is illuminated to circularly display thepresent currentNOTE:1) Because there is diode and current-limiting circuit inner the charger, it can be used together with charging generator, and there is no need to disconnect the charger when cranking;2) During genset is running, high current will cause voltage drop in charging line, so recommend separately connecting to battery terminal to avoid disturbance on sampling precision.==========Hign-concerned Chemical : NoneModel Number : BAC2410Dfeature : auto chargingvoltage : DC24VMax. Charge Current : 10AWorking power range : AC 100-277VDimensions (mm) : 205.5*131*55Installation dimensions (mm) : 190*120use for : engine starter battery

• Battery Chargers
• BAC2410D 10A 24V Generator Battery Charger Module Auto Intelligent Float Charging Circuit Board Monitoring display